Router Help/Setup and FAQs

[Prank1]

I have a working Port Magic Crack! i will put up download here, and instructions. (Instructions also in .Zip file)

HOW TO CRACK PORT MAGIC:

1) Delete the Port Magic Shortcut on your Desktop.

2) Place the 'Arn.exe' file in the same folder Portmagic.exe is in (Normally C:\Program Files\Port Magic)

3) Create a Shortcut From the 'Arn.exe' file that you just placed in the same folder Portmagic.exe is in, and place it on the            Desktop.

4) Now it's cracked, but theres one more thing left to do. Run that shortcut, then go to 'Options' and Untick (if it hasn't already)     'Start Port Magic When Computer Starts' or something like that.

       Now, everytime you want to run Port Magic (as the full version) Use the shortcut you made earlier (The one that directs             to 'Arn.exe')

[Hatar]

Ok stupid question but where exactly can I find the router pass and username on the instructions or are they made?

[philliyxx]

3.5.8.   

UDP port

Nox retail servers use UDP port 18590.  Official Nox servers use ports 18590 - 18599.  For those of you behind proxies/firewalls or using NAT, Consult your network administrator or your documentation for details on configuring your system to connect to Nox. (Allow all traffic to all destinations. Necessary for peer-to-peer connections and game play)

Hosting with router- 2 options: Port Foward or Enable DMZ

PORT FORWARD OPTION

1.Gather information (Router Brand/Model, USERNAME, PASSWORD, DEFAULT GATEWAY)
2. To find default gateway- Start your command prompt- start>run>command or cmd then type "ipconfig"
Should see Default Gateway Ip: NUMBERS- Write down the numbers.
3. Find username and passwords- Defaults are Username: Admin -----  Password: Password or Username: Blank Password: Admin
4.) Reset router if you dont have access- reset router by button or unplugging shit.
5. Go to http://portforward.com/english/routers/port_forwarding/routerindex.htm find your Brand/Model and then there should be a list of application and games, choose nox. - Follow the instructions and enter in nox's udp port 18590

ENABLE DMZ OPTION

Basically in your router options look for WAN SET UP or something similar. Check the Enable DMZ option and enter in your default gateway ip in the blank. This will make your computer really vurnarable though.

[avivkiller]

hello all

i hope u guys can help me

i have dl 604 .. i follow every instartion here to open port in my router
and still not work

i put my ip use 18590 port in UDP

and still nothing
any advice plz???

[Morden Tral]

If you have windows xp and above your computers firewall can block nox hosting. Make sure you have the port open / a firewall exception for nox.

[ogrelord]

Is this correct?

[Josh_Maxwell]

Ok, so I know I'm using Linksys.

I attempted to do what the instructions on those sites asked, but after attempting the first step of entering my ip into the adress bar all I got was a "page cannot be displayed" and nothing else. My connection is wireless if that might have anything to do with anything here. Any kind of help would be appreciated. If you need any more info just ask, I will answer as soon as I can.

Exact same problem :/

[Zoa]

Then you probably aren't entering the correct IP for your router. You should be able to look it up through ipconfig.

Start -> Run
Type "cmd" and press Enter
Type "ipconfig" and press Enter

This will list all of your network devices. Find that one that is associated with your wireless device and look for the phrase "Default Gateway." To the right of this will be an IP address, probably starting with 192.168. This should be the IP of your router and the IP that you need to go to in your web browser.

[Josh_Maxwell]

Linksys 2 (Start at number 4, and on number 8 use your computer's IP]

I have parts that are Linksys, but I have installed Belkin on my computer, what should I do for that?

[Zoa]

Follow the instructions for whatever your router is.

[cj_mcnutt]

so alot of sources say port 18590 is needed for nox but the site listed in common problems "portforward.com" says this -
-Netgear wgr614v7 - Nox -:
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Nox requires you to forward the 1234-1237,3840,4005,4808,4810,4995,7000-7002 ports. Go ahead and enter the settings shown above into the Custom Services menu and then click Apply

...it doesn't mention the 18590.. so after i opened all the above i was finally able to get some koreans to join but not sure if usa ppl will get the time out error when they try to join..
Posted on: August 31, 2008, 03:38:13 AMok it seems that every one can join my games!!

[Sharky]

nvm

[philliyxx]

The fucking manual lists that port so whatever. WHIO STILL HAS THE MANUAL?

[Morden Tral]

18590 is the port american servers use, maybe korean servers use a different default port. However you can specify what port you want to use in the shortcut with -port


Actually scratch that, I know for a fact that korean servers use 18590 too, I used to send my bot into their servers to talk to them.

[n0x]

The fucking manual lists that port so whatever. WHIO STILL HAS THE MANUAL?

I still do. lol